|
Author
|
Topic: Very odd (and crippling) problem
|
Aladar
Pilot
|
posted 11-01- 07:52 PM
   
Something very weird and disturbing has happened with my barracuda. I was updating the gear on the barracuda, importing updated LODs and such. Well, when I go to FSDOE and load up the barracuda, it starts. I go to an external view, looks ok, lower the gear.. all of the sudden, CTD. I looked for maybe a DOF with a skrewed up reference, but I am going to try and go back and see if I can pinpoint which LOD it could be. Please reply if you have a suggestion.------------------
"Don't move, if we scatter, he'll pick us off! Stand Together!"~~Aladar
Visit my site! IP: Logged |
Snickers
Pilot
|
posted 11-01- 11:19 PM
had something similar happen on the P38.... Does it only happen when you view a particular part of the plane? (In My case I was OK until I viewed the tail. wt told me that this is caused by a problem with one of the normals. He also told me how to fix it but I dont have access to those emails right now...You said this happens when you lower the wheels, does it happen if you start on the ground and look at the wheels?
Hey wt! wakeup! ------------------
Snickers
=FC=
 [This message has been edited by Snickers (edited 11-01-2000).] IP: Logged |
Aladar
Pilot
|
posted 11-01- 11:31 PM
Yes, it did. The problem was that the gear doors were 2-2 sided pieces put together, when I set them to 1 sided, it skrewed up.IP: Logged |
wakeup tailgunner
Pilot
|
posted 11-02- 05:08 AM
Glad you got it fixed....My problem was due to an object with dogy polys. What made mine such fun to pin down was it was in a 2nd Level LOD. all was o.k except when you zoomed out, CTD! Optimising surfaces in AC3D cured my problem. When you have 2 one sided parts though, optimising can be a littel tricky! IP: Logged | |
FSIC Messageboard
UBBFriend: Email This Page to Someone! 
