|
Author
|
Topic: CTD Problems
|
Von
Pilot
|
posted 02-04- 01:05 AM
   
I have loaded from scratch the program the patches (1.50, 5.3, 5.3b) the plane pack 6, and Nations V2, and every time I try to fly the YAK, TA, and PE from the hanger I crash to Desktop.... 
Other planes load and fly fine.
I'm still choosing other planes to see if they fly ok.IP: Logged |
Jerry
Pilot
|
posted 02-04- 01:28 AM
Don't load 5.3 and 5.3b. They are earlier plane paks. 6.0 is the current plane pak. Maybe this is your problem.Do these 3 planes fly in Training Missions? IP: Logged |
Von
Pilot
|
posted 02-04- 03:44 PM
I can't seem to fly these planes in the traning missions ether. I get the cockpit for a 1/2 a second and the windup of the engine starting then CTD? It is only these 3 planes. (Yak-3, Pe2, TA 152.)
I'm don't know what is causing it....
My configuration is ...
Intel VC820 system board, Intel P3 550 CPU, 100MHz VC memory 128MB, 16MB Voodoo3 3000 AGP card, PCI SoundBlaster Live, Direct-X 8.0, Window 98 Second Edition, I have the latest drivers and newest Bios for all my Items loaded. I have never had a problem with the Direct-X 8.0.
Thanks For any help.IP: Logged |
Jerry
Pilot
|
posted 02-04- 08:30 PM
Sound like your missing something in the startup.ppf file for these planes. I'm emailing mine for you to compare or try. Mine is pretty complete, I download everything just about.IP: Logged |
Von
Pilot
|
posted 02-05- 09:00 PM
I tried the startup file, renaming my old one startupold, and deleting the cache files but it still CTD on those 3 planes after 1/2 a second of cockpit and the engine windup.
bummer.... IP: Logged |
Jeeves
Pilot
|
posted 02-06- 10:57 AM
Heya Von...Sometimes, a problem with squadrons causes a CTD....open the misison up and change the squadron names of the planes-- this may help. ------------------
Brought to you by the campaign for a better Dauntless! Jeeves =FC= IP: Logged |
Von
Pilot
|
posted 02-06- 11:48 AM
Thanks Jeeves, I'm at work right now so I'll look into this tonight, I also downloaded the JU52 by Rendsburger getting ready for the paratrooper drops but this plane will not fly ether... I'm really bummed now...IP: Logged |
Jerry
Pilot
|
posted 02-06- 12:16 PM
I can't get the Ju52 to fly either (CTD). It used to but not now. I reinstalled it and it still CTD. I'm not sure what changed.IP: Logged |
Von
Pilot
|
posted 02-06- 10:21 PM
I'm getting a little closer, I do think it,s a problem with the squadron names as I have changed a couple and got the Ju54 to fly and the Yak loads but under the ground in the hanger test, I'll test some more. Is there a squadron patch I missed?
Thanks for all your help.IP: Logged |
FSIC Messageboard
UBBFriend: Email This Page to Someone! 
