FSIC Messageboard
  Help / FAQ
  Joystick ?

Post New Topic  Post A Reply
profile | register | preferences | faq | search

UBBFriend: Email This Page to Someone! next newest topic | next oldest topic
Author Topic:   Joystick ?
CrazyHorse
Cadet
posted 11-04- 10:06 PM     Click Here to See the Profile for CrazyHorse   Click Here to Email CrazyHorse     Edit/Delete Message   Reply w/Quote
I have read through a lot of these threads and have not found an answer to this ?

I have a MSFF SideWinder Pro and whenever I launch a mission, all the tension to center my stick seems to disappear and the stick feels "mushy".

The response inflight seems sluggish and I do get the forcefeedback but it is fairly weak compared to other sims I fly.

As soon as a mission ends and I exit the center tension returns to the stick.

I have DX70a,
the Stickworks program,
Voodoo3 2000 3d accellerator
Drivers version 1.04 (as the 1.05 v does not support glide)
I also D/L a 03fightersquadron Joytick Cfg. but have no idea how it is supposed to be intalled. (there is no "read me")
This file looks like a JS config file but I tried putting it in my stick profile folder with no results. I also tried putting it in my main FSDOE dir and the Media with no results

Also I noticed that the error message in "Media" recognizes my card as a 12MB glide when it is really a 16MB card.

Any information would be appreciated.

[This message has been edited by CrazyHorse (edited 11-04-2000).]

IP: Logged

Stephen
Cadet
posted 11-05- 11:36 AM     Click Here to See the Profile for Stephen   Click Here to Email Stephen     Edit/Delete Message   Reply w/Quote
Did you change the settings in the option?
and your 16mg video card probably has 4mg of 2D.

Hope this helps!!!!!!

IP: Logged

CrazyHorse
Cadet
posted 11-05- 04:34 PM     Click Here to See the Profile for CrazyHorse   Click Here to Email CrazyHorse     Edit/Delete Message   Reply w/Quote
OK that sounds logical. CC I changed the options.

I figured out how to load that config file into the Stickworks settings too. I was trying to place it in profiles and it goes into the Stickwork "save settings" folder.

Thanks

IP: Logged

Hawker
Pilot
posted 11-08- 12:26 AM     Click Here to See the Profile for Hawker   Click Here to Email Hawker     Edit/Delete Message   Reply w/Quote
Hate to say it ,but i finally went and bought another stick.I know exactly what ur saying,cause I had the exact same problem.Never was fixed,was suppose to be,dunno if it will ever be.

IP: Logged

Sailor
Cadet
posted 11-08- 05:50 AM     Click Here to See the Profile for Sailor   Click Here to Email Sailor     Edit/Delete Message   Reply w/Quote
I've been flying SDOE for 18 month now with a MS SideWinder FF, I think the FF effects are very different from one plane to the other. My opinion is that is depends on the amount of "lift" on the controls as interpreted by the Openplane engine. This can change depending on the speed as well, and I remember having very different FF effects on the Me109s different versions and releases when they were still betas.
You might need to adjust the FF settings according to the planes you fly.
Anyone can confirm or infirm this ?
BTW, I've never managed to get a real good config set up for all the buttons, but I like the FF effects...

IP: Logged

CrazyHorse
Cadet
posted 11-12- 05:32 AM     Click Here to See the Profile for CrazyHorse   Click Here to Email CrazyHorse     Edit/Delete Message   Reply w/Quote
Since I upgraded to DirectX8, the stick response seems to have improved noticeably.

I still get the lock up if I try to use glide with the 3DFX V1.05 drivers but Direct 3D runs better.

I can get glide with 1.04 drivers but only as high as 800 X 600 res.

I have been experimenting with changing Desktop colors, normally I run DT at 16 but I'll try 32 and mipmap is disabled , but I'll try enabling it.

The Vid card is Voodoo3 2000 so maybe the settings work backwards from the V5 cards
LOL , Ill try anything

"Don't show me the dreaded black screen of Death"

IP: Logged

CrazyHorse
Cadet
posted 11-12- 06:12 AM     Click Here to See the Profile for CrazyHorse   Click Here to Email CrazyHorse     Edit/Delete Message   Reply w/Quote
I just did a test run with the desktop colors set to 32 and mipmapping enabled.

The Voodoo3 2000 will now run SDOE in glide with 3Dfx v1.05 drivers.

The picture still loads off center and must be corrected with Cntrl + command, but the plus is that the text font size displays like 800 X 600 with the higher resolution setting of 1024 X 768.
Possibly an ini setting may correct this,I'm not sure yet.

But no CTDT and DX8 seems to give the MSFF Pro response much better.

I'll post anything new I learn by experimenting.

------------------
CrazyHorse

[This message has been edited by CrazyHorse (edited 11-12-2000).]

IP: Logged

All times are CT (US)

next newest topic | next oldest topic

Administrative Options: Close Topic | Archive/Move | Delete Topic
Post New Topic  Post A Reply
Hop to:

Contact Us | Fighter Squadron Information Center

(This site Copyright (c) 1999 Inertia LLC)

Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45c