|
Author
|
Topic: Abouth P47 French by Argon
|
tonysilveira
Pilot
|
posted 10-03- 08:16 PM
   
The Plane crash when I try to landing or takeoff!
Some ideias?
My files are all fine anothers P47 works well
Sorry its a great Plane but...
Argon sorry if you can Help!
with my best regardsIP: Logged |
ArgonV
Pilot
|
posted 10-03- 09:09 PM
Hmmm, you did extract it in the correct location? And you do have Nations 2 installed? And you do have the contest pack P-47d installed correctly? If all of this is true, try opening up the mission you are trying to fly with the mission editor, and quit and save it.Note that the contest P-47d had to have airfoils and those must be added to the startup.ppf file. But you say you have it and it works so that should not be an issue. IP: Logged |
tonysilveira
Pilot
|
posted 10-04- 08:41 PM
Argon the problem are this,
When I press the Key E for start the engine for example training mission Takeoff
the plane start balance and turn to the ground.
When I start a mission like Air-To-Air Combat only when I arrive to the solo, its the same problem.
I stop the engine before and landing ok.
I donīt no
I think its problem with the props or my Keyboard defenitions.
[This message has been edited by tonysilveira (edited 10-04-2000).] IP: Logged |
ArgonV
Pilot
|
posted 10-04- 08:52 PM
Hmmm.... for take off, make sure to release your brakes and to throttle up slowly.IP: Logged |
tonysilveira
Pilot
|
posted 10-04- 08:56 PM
Ok its this right!!!!
He He He!!!!!
Im a Cadet but...
Ok thanks for the idea!!
I try to correct the problem.
I send an Email for you later,
many thanks for all.
IP: Logged |
ArgonV
Pilot
|
posted 10-04- 09:03 PM
No problem. To release the brakes, press the B key. Please tell me if this works for you.IP: Logged |
tonysilveira
Pilot
|
posted 10-15- 08:51 PM
No Argon work but but have the same problem!!!
I change only the sm file p47d new for the old and every thing its fine,canopy works and so on...every thing.IP: Logged |
tonysilveira
Pilot
|
posted 10-15- 09:04 PM
The version P47D v2.0 the last in site tem jug the sm file p47d donīt work!
But the P-47D-28-RA THUNDERBOLT March 2o, 2ooo works well in a perfection.
I have all fine airfoils Nations V2 correct (have a same problems but now fine only problems abouth instalation of a zip files)
I install always manual not problem.
I have a Plane packs patchs,contest packs..
Its very strange...I thing its a easy and stupid thing but always we cant see....its same old story.Iīm very meticulousious but...
~īm not new with PC and this game Iīm work now in project of a new plane "NorAtlas Bomber" I work with 3D studio max and so on...Sorry Argon. I donīt no...
Ok the best for you I never...Acept the fails I try over and over.Lol
thanks.
With my best regards.IP: Logged |
wakeup tailgunner
Pilot
|
posted 10-16- 04:04 AM
Tony, this problem with the P47....When you start the engines, does the plane lurch into the air and bounce around until it blows up? If so, I think I know what the problem may be. The P47 has an little object that causes smoke on startup. It's attached to the prop, and breaks off when you start the motor to activate smoke. If this doesn't work ( I tried a cut and paste onto the B17 and it sidn't work) the object hits the ground and throws the plane into the air! If that sounds like your problem, i'll let you know what to remove! IP: Logged |
ArgonV
Pilot
|
posted 10-16- 06:57 AM
Hmmm... this is all beyond me... Other than what wakeup said, I havent a clue...  IP: Logged |
duke
Cadet
|
posted 10-17- 08:08 PM
Install SDOE control 2000, it has a feature when turned on activates the display driver in a superspeed mode. I had your problem with the original P47 and that fixed it right away. The French P47 worked fine right from the start for me.IP: Logged |
FSIC Messageboard
UBBFriend: Email This Page to Someone! 
