posted 05-28- 06:56 AM
For more information, go here:
http://www.fightersquadron.com/ubb/Forum1/HTML/004949.html ---------------------------------------------
DOWNLOAD INFORMATION:
For now, the Ground Pack has NO PAR file. If there's enough demand for one, then I'll happily oblige. But without a PAR file, you guys will find it easier to mod this pack to high heaven.
The Ground Pack is 30MB normally, but luckily is only 15 MB in size when compressed 
Ok guys, let's hope I get it right this time! 
http://members.nbci.com/harman_5/GroundPack/DrivableGroundObjectPack_part1.zip (4.86MB)
http://members.nbci.com/harman_5/GroundPack/DrivableGroundObjectPack_part2.zip (4.86MB)
http://members.nbci.com/harman_5/GroundPack/DrivableGroundObjectPack_part3.zip (4.82MB)
http://members.nbci.com/harman_5/GroundPack/DrivableGroundObjectPack_part4.zip (615KB)
After downloading the pieces, join them, and upon joining, a setup.exe will be created totalling 15MB. Simply run this setup.exe and follow the prompts to install the pack. Simple!
To 'join' these pieces after downloading, you'll need a program called "HJ Split". HJ Split is FREEWARE.
To download HJ Split, click below:
http://members.nbci.com/harman_5/GroundPack/hjsplit.zip (169KB)
If you are unsure how to use HJ Split to join the files, click below to download the updated "How To" written by me:
http://members.nbci.com/harman_5/GroundPack/HowToJoin.txt (1KB)
Just in case, I will insert most of the instructions from the above file into this post, please follow the directions carefully:
-------------------------
The pieces of the pack are zipped to prevent possible file corruption during up/down load.
1. Make sure you have downloaded ALL pieces of the ground pack. Please download them to the same directory.
2. Unzip each part of the pack.
3. Go inside each unzipped folder and move each piece of the pack (piece files end in *.00*) to the SAME directory. You should see all the pieces in the same folder/directory arranged nicely.
4. Start HJ Split. Click "Join".
5. Click the small "Input" button in the resulting window.
6. Browse for the first piece of the ground pack (the file ending in .001).
7. Click OK, the rest of the pieces will be found and joined automatically PROVIDING: they are all in the same folder/directory.
8. After joining is complete, exit HJ Split.
That's it!
Now just locate the 'joined' setup exe in the location the pieces were before you joined them, and run the setup exe to install the ground pack. Refer to the setup program for more information regarding the ground pack.
----------------------------
OR
If you wish to download this Ground Pack as a whole, then please click the following link:
ftp://ftp.3dgw.com/incoming/GroundPack.zip
If the above doesn't work, try this one which is also a simfiles link:
DOWNLOAD GP WHOLE
As I said before, you'll need to add some lines to your Startup.ppf to get the weapons the vehicles use to work, please make sure you add them. If you are uncomfortable with messing with your Startup.ppf, then please first MAKE A BACKUP of your existing Startup.ppf file in "Media\" and then download my Startup.ppf which has most if not all sm and ppf references for SDOE:
http://members.nbci.com/harman_5/GroundPack/startup.ppf (4KB)
My web site also has these download links.
If you're wondering about the extra schemes, please wait, because of the extra vehicles I've added, these may take a while coming, feel free to make your own schemes in the mean time though. Apart from this, I will now set out seperate each vehicle from the pack and release them seperately for people who don't want the whole sheebang.
Fingers crossed it will work this time...
[This message has been edited by Harman_5 (edited 08-13-2001).]
FSIC Messageboard
UBBFriend: Email This Page to Someone! 
posted 05-28- 06:56 AM
posted 05-28- 09:03 AM
posted 05-28- 10:51 AM
posted 05-29- 02:08 PM
posted 05-30- 09:41 AM
posted 05-31- 08:25 AM
