|
Author
|
Topic: SOMEBODY HELP ME W/ THE MC.205,PLEASE!!!
|
li'l bastard
Pilot
|
posted 01-14- 05:15 AM
   
I have the 3d model, she needs just a few other things, but above all she needs an OPS guy to work on it!!!! We could add at least three new planes without too much work!!!
PLEASE!!! Don't let me go down on flames!!!li'l desperate bastard ------------------
IP: Logged |
ArgonV
Pilot
|
posted 01-14- 11:41 AM
li'l bastard, what format is the 3d model in? LOD format? If its in LOD format, send me the model and I'll get it into OPS for ya. Im not going to rush this however. Im going to do it gradually (A few days) because Im still taking a relax period off of OPS. But that time is just about up... so please, if the model is in LOD format, send her on over.  IP: Logged |
li'l bastard
Pilot
|
posted 01-14- 03:58 PM
think I can convert it, right now it's on .3ds format, but I have a good converter and can change it in most of all the known formats...lemme know ASAP Argon!!!!li'l b IP: Logged |
ArgonV
Pilot
|
posted 01-14- 04:01 PM
li'l bastard, yes PLEASE convert it to LOD format. Thats what it has to be in for me to import the parts into OPS. If you dont know how or dont know what to use, ask Aladar or Razer as I know they know. IP: Logged |
li'l bastard
Pilot
|
posted 01-14- 04:05 PM
I can't w/ my converter, but I think Razer has the latest model, try asking him directly and let me know, k?
Thank u in advance!!!!li'l b IP: Logged |
wakeup tailgunner
Pilot
|
posted 01-14- 04:21 PM
mail me the 3ds and I'll happily LOD it up for you!Shouldn't take too long for a little fighter! Could have it back to you tomorrow evening! IP: Logged |
ArgonV
Pilot
|
posted 01-14- 04:28 PM
wakeup, when you convert it to LOD format, could you then send it to me too because Im going to get the plane into the game. Thanks buddy! IP: Logged |
li'l bastard
Pilot
|
posted 01-14- 04:28 PM
k, sent u the model!
Argon, WT will send u the model, k?
THANK U GUYS FROM THE BOTTOM OF MY HEART, I REALLY APPRECIATE IT! CAN'T WAIT TO SEE A REAL ITALIAN FIGHTER FLIYNG!!!!!LI'L HAPPY B IP: Logged |
li'l bastard
Pilot
|
posted 01-14- 04:30 PM
GOSH!!!!
Forgot to tell that she needs texture mapping!!! I have a skin ready, u want it Argon?li'l b
IP: Logged |
ArgonV
Pilot
|
posted 01-14- 04:31 PM
P.S. Razer told me it needed to be texture mapped... I can not do texture mapping and I doubt Wakeup will. In which case it will have to remain textureless for the time being until I get it all working in OPS. Im no FM guro however. I'll need heaping gobs of help in that area and in the DM area. IP: Logged |
li'l bastard
Pilot
|
posted 01-14- 04:34 PM
don't worry, I think we can map it even after, isn't it? If u just import it w/ OPS and do the basics I'll then turn it to somebody else, anyway u'll have a special place in the credits plaque!  li'l b IP: Logged |
li'l bastard
Pilot
|
posted 01-14- 04:40 PM
now that somebody is helping me I'll come back working on the MC.202 and 200 as well!!!
YUHUUUUUUUUU!!!!Thanks again guys!!!!
IP: Logged |
wakeup tailgunner
Pilot
|
posted 01-14- 04:48 PM
Lil b, mail me the skin! It's far easier to map before you break it into LOD's. If you try to do it afterwards, you can get some odd shading problems. If you map the big bits when they are joined together, it looks a lot better! I missed these posts! I was busy looking at the model! IP: Logged |
wakeup tailgunner
Pilot
|
posted 01-14- 04:53 PM
ohhhh read the posts Mr Tailgunner!DM.....no problem! I have been playing with a real engine model for the 109! While bouncing ideas to and fro with Nat on real engine modelling, I threw it together to test a few ideas! It works! And guess what engine lives in the Veltro ( and the Folgore) yup, licence built Db series inverted V 12 cylinder inlines! When you reach that stage, you can plug it straight in! Adds a whole new depth! Can texture map no probs, by the way. Just can't seem to actually paint a skin worth a damn! Odd really! I'm actually quite a good painter, just not when you want to wrap the thing around a 3d model! IP: Logged |
ArgonV
Pilot
|
posted 01-14- 04:59 PM
wakeup thanks! When its ready to be Dmed, Ill just copy/paste your work into it and wala! Instant ready-to-go DM!  IP: Logged |
li'l bastard
Pilot
|
posted 01-14- 05:00 PM
That's great guys!
This project's starting to work out!!!
I swear I'll start studiyng OPS!!!
I was just worried about the polys number, and yes the Alfa Romeo produced a DB 601 model under license for the Folgore, I think the Gustav one, I'm goin to check out my stuff and I'll tell u...IP: Logged |
FSIC Messageboard
UBBFriend: Email This Page to Someone! 
